Stackable All-in-One Energy Storage System 5kW Hybrid Inverter 51.2V 100Ah LiFePO4 Battery Module RS485 CAN WiFi Monitor For Home Solar Backup Power
| Battery Module: | 51.2V100ah | Cycle Life: | ≥6000 Cycles |
| Rated Energy: | 5.12kwh | Commnication Port: | RS485/CAN |
| Cell Type: | LFP | Colar: | White |
| Certificate: | UN38.3/MSDS/CE | Max.discharg current: | 100A |
| Charge Voltage: | 57.6V | Cut-off Discharge Voltage: | 43.2V |
| Max Stack Quantity: | 8 Modules (38.4kWh) | Temp Range: | Charge 0℃~50℃; Discharge -20℃~55℃ |
| High Light: | Built-in Inverter Energy Storage Battery,All-in-One Energy Storage Battery,51.2V 100Ah Stacked Energy Storage Battery |
||
This stackable all-in-one energy storage system integrates a 5kW hybrid inverter and 51.2V 100Ah LiFePO4 battery modules, solving common drawbacks of split solar power systems including complicated wiring, limited capacity expansion and poor inverter compatibility. Adopting plug-in stack design without extra parallel cables, it supports free module combination up to 8 units for 38.4kWh total capacity. Built-in parallel circulation control module and dual RS485 & CAN communication ports match mainstream inverters globally. It delivers pure sine wave AC output with <10ms UPS transfer time, supports PV, grid and multi-unit parallel operation. Certified with UN38.3, MSDS and CE, the indoor IP20 unit works stably between -20℃~55℃ and achieves over 6000 cycles at 0.3C charge/discharge.
- Plug & Play Stackable Modular Design
Tool-free vertical stacking without external parallel wires, flexible capacity expansion from 10.24kWh to 38.4kWh as power demand rises. - All-in-One Hybrid 5kW Inverter
5000VA rated power, 10000VA surge power, pure sine wave output, dual AC voltage options for EU & US markets, max 6 inverters parallel. - Safe Long-Life LiFePO4 Battery
Grade LFP cells with 6000+ deep cycles, built-in BMS full protection against overcharge, over-discharge and overcurrent. - Dual Communication & WiFi Monitoring
RS485 and CAN ports for inverter linkage; WiFi module supports remote real-time system status viewing. - Wide Temperature & Stable Operation
Discharge normally at -20℃ low temperature, IP20 indoor protection, 120-450V wide MPPT PV voltage range. - Complete Global Certifications
Pass UN38.3, MSDS and CE certifications to meet international transportation and safety standards.
| Item | Spec |
|---|---|
| Cell Type | LiFePO4 |
| Nominal Voltage | 51.2V |
| Capacity | 100Ah |
| Single Module Energy | 5.12kWh |
| Max Discharge Current | 100A |
| Charge Voltage | 57.6V |
| Cut-off Discharge Voltage | 43.2V |
| Communication | RS485, CAN |
| Max Stack Quantity | 8 modules (38.4kWh) |
| Cycle Life | ≥6000 cycles @0.3C/0.3C |
| Temp Range | Charge 0℃~50℃; Discharge -20℃~55℃ |
| Item | Spec |
|---|---|
| Cell Type | LiFePO4 |
| Nominal Voltage | 51.2V |
| Capacity | 100Ah |
| Single Module Energy | 5.12kWh |
| Max Discharge Current | 100A |
| Charge Voltage | 57.6V |
| Cut-off Discharge Voltage | 43.2V |
| Communication | RS485, CAN |
| Max Stack Quantity | 8 modules (38.4kWh) |
| Cycle Life | ≥6000 cycles @0.3C/0.3C |
| Temp Range | Charge 0℃~50℃; Discharge -20℃~55℃ |
- Residential Off-Grid Solar System
Existing Drawback: Separate inverter and battery require messy wiring, hard to expand capacity later.
Solution: Integrated stackable design simplifies installation, add battery modules anytime to boost storage capacity. - Household Grid Backup Power
Existing Drawback: Ordinary power equipment has long switching delay, causing blackout during power failure.
Solution: 10ms fast UPS transfer ensures continuous power supply for home appliances. - Remote Villa & Cabin Independent Power Supply
Existing Drawback: Common batteries fail to discharge normally in cold outdoor environments.
Solution: Stable discharge at -20℃ supports year-round power supply for off-grid remote buildings. - Small Commercial Office Energy Storage
Existing Drawback: Discrete power systems occupy large indoor space with low overall efficiency.
Solution: Compact stacked structure saves installation space, high conversion efficiency up to 92%.
- Adjust stack module quantity and total energy capacity to match residential & commercial project needs
- Custom inverter output voltage, frequency and communication parameters for regional market standards
- OEM brand logo, nameplate and outer carton printing on system cabinet
- Modify BMS protection thresholds and WiFi monitoring interface functions
- Support small trial batch orders and flexible mass production scheduling
- Pre-sales technical matching: Engineers provide system configuration and inverter compatibility consultation within 24 hours.
- Full production inspection: Every unit passes charge-discharge aging and communication function testing before shipment.
- Remote after-sales troubleshooting for installation, monitoring and parallel connection issues.
- Complete UN38.3, MSDS, CE documents to assist global customs clearance for sea & air shipping.
- Long-term technical upgrade support for updated energy storage system versions.
- Packing
Single unit wrapped with shockproof foam inside reinforced export carton; wooden case packaging available for bulk orders. All packages attach battery hazard labels and specification stickers for customs inspection. - Shipping
Complete dangerous goods certification supports sea freight, air freight and international delivery. Logistics tracking number will be sent after dispatch, our team tracks shipment until goods receive.
Q1: Can I add more battery modules after initial installation?
A1: Yes, the modular stack design supports adding modules freely, up to 8 units for maximum 38.4kWh capacity.
Q2: Is this system compatible with most mainstream solar inverters?
A2: Equipped with standard RS485 and CAN communication ports, it matches most global mainstream inverter brands.
Q3: Can multiple inverters connect in parallel for higher power output?
A3: The hybrid inverter supports parallel connection of up to 6 units to expand total output power.
Q4: Can this system work normally in cold winter areas?
A4: It maintains stable discharge performance at -20℃, suitable for low-temperature residential and off-grid scenarios.
Q5: Do you accept customized systems for distributors and EPC contractors?
A5: Full OEM & ODM custom
Brand Name
A:The Brand Name of the Stacked Energy Storage Battery is YUNFAN.
Model Number
A:The Model Number of the Stacked Energy Storage Battery is FY-Battery.
Certifications
A:The Stacked Energy Storage Battery is certified with CE,UL,RESH.